The Ultimate Stone Sealing System

Let us protect your client’s greatest investment. With over 22 years of experience in concrete restoration we can help. Wind Driven Rain poses the greatest threat to any Cultured Stone Structure. Once the rain has found its way into the structure massive damage can occur in a very short period of time. We have treated homes with over $ 60,000.00 worth of damage due to moisture related issues. We know that the cultured stone cannot be water proofed at the factory are at the dealer’s location because the stone could not be attached to the home. So let us help you after the installation.

Step 1

Click here for more DPS Information

The First Step in the Wakefield Stone Sealing System is the application of the InnerSeal DPS. It penetrates 100% below the surface and provides a permanent 1st. stage internal moisture vapor barrier. Once applied it becomes part of the stone and grout beautifully enhancing the stones color and variations. This product can also be colored for stone that has lost some of its luster. This product never needs to be re-applied for the life time of the stone. See our power point presentation on how InnerSeal DPS works. This product also increases the strength of the stone and grout about 23% in 28 days. Meets ASTM 514 wind driven rain test for stopping moisture penetration. This product allows your stone to breathe. Other products, like acrylics, urethanes and epoxies do not allow your stone to breathe.

Step 2

Click here for Hydro-Top Information

The Second Step in the Wakefield Stone Sealing System is the application of the Hydro-Top. When applied it will attach itself to the InnerSeal DPS and form a 2nd stage internal moisture vapor barrier. This product is like no other as it has 5 different penetrating products all reacting inside the stone and grout. There is not another Stone Sealing System that offers this much protection and color enhancement. This product never needs to be re-applied for the lifetime of the stone. Meets ASTM 514 wind driven rain test for stopping moisture penetration. This product allows your stone to breathe. Other products, like acrylics, urethanes and epoxies do not allow your stone to breathe.

If budget requirements don’t allow for both steps you can use the Hydro-Top as a stand-alone system.

Our products are all water based (non-solvent) and work on concrete, travertine, brick, pavers, all stone types, and pool decks. Their unique combination of chemicals are made to last indefinitely. Once applied and cured the combinations do not chip, peel or flake, like acrylics, urethanes or epoxies. Our unique products, once they penetrate the surface, they go through a chemical reaction, that turns into a solid, filling the voids left behind where the water has evaporated during the curing process. Once the product cures and combines with the stone, it will never come out. In all the applications we have never had to go back and correct any moisture issues.

Many contractors choose to protect the cultured stone structures with a cheap single component silane are a siloxane penetrating sealer. These only offer water resistance and not waterproofing to these structures. They do not pass the ASTM 514 Wind Driven Rain Test. They also have to be re-applied every 1 to 3 years to offer any protection at all. Even then wind driven rain can penetrate these type of sealers.

Before Application

After Hydro-Top Application

Before Application

After Hydro-Top Application

Before Application

After Hydro-Top Application

Before Application

After Hydro-Top Application